1.DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
When disconnecting the cable, some systems need to be initialized after the cable is reconnected (See page General>INTRODUCTION>REPAIR INSTRUCTION>INITIALIZATION).
45287
2.REMOVE LOWER STEERING COLUMN COVER
Turn the steering wheel to the left and remove the screw.
Turn the steering wheel to the right and remove the screw.
Detach the 2 claws and remove the lower steering column cover.
45286B
3.REMOVE UPPER STEERING COLUMN COVER
Detach the 4 clips and claw and remove the steering column cover.
84650
4.REMOVE WINDSHIELD WIPER SWITCH ASSEMBLY
Disconnect the 2 connectors.
Detach the claw and remove the windshield wiper switch assembly.