Home › Vehicle Exterior › WIPER / WASHER › WASHER NOZZLE(for Front Side)
RM1440E _59 Vehicle Exterior _056170 WIPER / WASHER _0274199 WASHER NOZZLE(for Front Side) G

WIPER / WASHER  WASHER NOZZLE(for Front Side)  ON-VEHICLE INSPECTION  


PROCEDURE

Hide 85035 1.INSPECT WASHER NOZZLE SUB-ASSEMBLY

a.

With the engine running, check the position that the washer fluid hits the windshield.

Standard:

Washer fluid hits the windshield in the areas shown in the illustration.


E199007E01
3.019,0.473 3.175,0.670 0.156,0.197 10 A 4.118,0.473 4.274,0.670 0.156,0.197 10 A 3.22,4.129 3.376,4.290 0.156,0.160 10 B 3.913,4.129 4.070,4.290 0.156,0.160 10 B 4.509,2.971 4.665,3.131 0.156,0.160 10 C 5.93,1.905 6.134,2.065 0.203,0.160 10 *a 5.74,2.244 5.944,2.404 0.203,0.160 10 *b 5.543,2.511 5.747,2.671 0.203,0.160 10 *c 1.069,1.902 1.272,2.063 0.203,0.160 10 *a 1.304,2.232 1.507,2.393 0.203,0.160 10 *b 1.445,2.488 1.649,2.648 0.203,0.160 10 *c 3.203,3.069 3.407,3.229 0.203,0.160 10 *1 5.936,1.991 5.8,1.991 false 5.622,2.289 5.732,2.289 false 5.431,2.548 5.539,2.548 false 3.565,3.292 3.488,3.132 3.488,3.132 3.351,3.132 false 1.373,1.986 1.228,1.986 false 1.594,2.305 1.465,2.305 false 1.778,2.562 1.601,2.562 false

Text in Illustration
*1 Ceramic Line - -
*a Upper Limit *b Standard
*c Lower Limit - -
V100155

Washer Fluid Spray Area - -

Standard:
Area Measurement Area Measurement
A 254.5 mm (10.0 in.) B 150 mm (5.91 in.)
C 127.6 mm (5.02 in.) - -


If the result is not as specified, replace the malfunctioning washer nozzle sub-assembly.