Home › Vehicle Exterior › LIGHTING (EXT) › SIDE TURN SIGNAL LIGHT ASSEMBLY › 2009.08–2013.08
RM1440E _59 Vehicle Exterior _056171 LIGHTING (EXT) _0274203 SIDE TURN SIGNAL LIGHT ASSEMBLY G

LIGHTING (EXT)  SIDE TURN SIGNAL LIGHT ASSEMBLY  INSPECTION  


PROCEDURE

Hide 81740 1.REMOVE SIDE TURN SIGNAL LIGHT ASSEMBLY LH

a.
E127507E14
0.057,0 2.598,0.332 2.541,0.332 10 *a

Apply battery voltage to the connector and check the LED illumination condition.

OK:
Measurement Condition Specified Condition
Battery positive (+) → Terminal 1
Battery negative (-) → Terminal 2
LED illuminates


If the result is not as specified, replace the side turn signal light assembly.

Text in Illustration
*a Component without harness connected
(Side Turn Signal Light Assembly LH)