Home › Vehicle Exterior › LIGHTING (EXT) › SIDE TURN SIGNAL LIGHT ASSEMBLY › from 2013.08
RM1440E _59 Vehicle Exterior _056171 LIGHTING (EXT) _0274203 SIDE TURN SIGNAL LIGHT ASSEMBLY G

LIGHTING (EXT)  SIDE TURN SIGNAL LIGHT ASSEMBLY  INSPECTION  


CAUTION / NOTICE / HINT

HINT:
·

Use the same procedure for both the RH and LH sides.

·

The procedure listed below is for the LH side.



PROCEDURE

Hide 81740 1.REMOVE SIDE TURN SIGNAL LIGHT ASSEMBLY LH

a.
E127507E34
0.057,0.057 2.598,0.389 2.541,0.332 10 *a 0.953,0.643 1.080,0.795 0.127,0.152 10 E 2.482,0.611 2.609,0.763 0.127,0.152 10 B 2.432,0.705 2.16,0.705 2.16,0.705 1.974,1.219 false 1.12,0.733 1.35,0.733 1.35,0.733 1.485,1.213 false

Apply battery voltage to the connector and check the light illumination condition.

OK:
Condition Specified Condition
Battery positive (+) → Terminal 1 (B)
Battery negative (-) → Terminal 2 (E)
Illuminates


Text in Illustration
*a Component without harness connected
(Side Turn Signal Light Assembly LH)

If the result is not as specified, replace the side turn signal light assembly LH.