Home › Vehicle Exterior › LIGHTING (EXT) › REAR COMBINATION LIGHT ASSEMBLY › from 2013.08
RM1440E _59 Vehicle Exterior _056171 LIGHTING (EXT) _0274204 REAR COMBINATION LIGHT ASSEMBLY A

LIGHTING (EXT)  REAR COMBINATION LIGHT ASSEMBLY  INSTALLATION  


CAUTION / NOTICE / HINT

HINT:
·

Use the same procedure for both the RH and LH sides.

·

The procedure listed below is for the LH side.



PROCEDURE

Hide 81561D 1.INSTALL REAR COMBINATION LIGHT LENS AND BODY LH

a.

Attach the 2 clips and 3 guides to install the rear combination light lens and body LH.


b.

Install the 2 nuts.

Torque:
4.5 N*m (46 kgf*cm, 40 in.*lbf)


c.

Connect the connector.


d.

Install the cover.