Home › Vehicle Exterior › LIGHTING (EXT) › HIGH MOUNTED STOP LIGHT ASSEMBLY
RM1440E _59 Vehicle Exterior _056171 LIGHTING (EXT) _0274206 HIGH MOUNTED STOP LIGHT ASSEMBLY G

LIGHTING (EXT)  HIGH MOUNTED STOP LIGHT ASSEMBLY  INSPECTION  


PROCEDURE

Hide 81570 1.INSPECT CENTER STOP LIGHT ASSEMBLY

a.
E136359E15
0.11,0.025 0.377,0.235 0.267,0.210 10 *a 0.669,1.302 0.956,1.483 0.287,0.181 10 STP 2.513,1.293 2.669,1.474 0.156,0.181 10 E 1.444,1.408 1.013,1.381 false 2.01,1.37 2.517,1.376 false

Apply battery voltage to the connector and check the LED illumination condition.

OK:
Measurement Condition Specified Condition
Battery positive (+) → Terminal 2 (STP)
Battery negative (-) → Terminal 1 (E)
LED illuminates


If the result is not as specified, replace the center stop light assembly.

Text in Illustration
*a Component without harness connected
(Center Stop Light Assembly)