AUTOMATIC LIGHT CONTROL SYSTEM
General
When the headlight dimmer switch is in the AUTO position, the automatic light control sensor detects ambient light levels and outputs a signal to the main body ECU. The main body ECU controls the headlights, fog lights, clearance lights, taillights and license plate lights according to the signal from the automatic light control sensor.
Fail-safe
If the main body ECU detects a malfunction in the rain sensor, the main body ECU performs fail-safe control to prohibit automatic light control. If the headlights or taillights are on, the lights remain on until the headlight dimmer switch is turned off.
LIGHT AUTO TURN-OFF SYSTEM
General
The light turn-off system is used to prevent the driver from leaving the vehicle with the headlights, front fog lights, clearance lights, taillights or license plate lights on.
When all of the following conditions are met, the headlights, front fog lights, clearance lights, taillights and license plate lights turn off:
The ignition switch is turned from ON to off.
The headlights, front fog lights, clearance lights, taillights or license plate lights are on.
The driver side door is opened.