AUTOMATIC LIGHT CONTROL SYSTEM OPERATION CHECK
Turn the ignition switch to ON.
Turn the headlight dimmer switch to the AUTO position.
Cover the automatic light control sensor.
Check that the taillights and low beam headlights come on.
Uncover the automatic light control sensor.
Check that the low beam headlights and taillights turn off.
LIGHT AUTO TURN-OFF SYSTEM OPERATION CHECK
Close the driver door.
Turn the ignition switch to ON.
Turn the low beam headlights, high beam headlights and front fog lights on.
Turn the ignition switch off.
Open the driver door.
Check that all the lights turn off.