CUSTOMIZING FUNCTION WITH THE INTELLIGENT TESTER
The following items can be customized.
When the customer requests a change in a function, first make sure that the function can be customized.
Record the current settings before customizing.
Connect the intelligent tester to the DLC3.
Turn the ignition switch to ON.
Turn the intelligent tester on.
Enter the following menus: Customize Setting.
Select the setting by referring to the table below.
| Display | Default | Content | Setting |
|---|---|---|---|
| Sensitivity | Normal | A function to adjust the ambient light sensitivity of the automatic light control system.*1 | Light2, Light1, Normal, Dark1 or Dark2 |
| Disp Ex ON Sen | NORMAL | A function to change the level of ambient light at which the system dims lights such as the combination meter indicator light, the A/C indicator light and the clock light.*2 | LIGHT2, LIGHT1, NORMAL, DARK1 or DARK2 |
| Disp Ex OFF Sen | NORMAL | A function to change the level of ambient light at which the system cancels the dimming of lights such as the combination meter indicator light, the A/C indicator light and the clock light.*3 | LIGHT2, LIGHT1, NORMAL, DARK1 or DARK2 |
The sensitivity adjustment may be difficult to confirm. Check by driving the customer's vehicle.
When the setting is closer to the "Light" side, the system turns the lights on even when the surrounding area is relatively bright. When the setting is closer to the "Dark" side, the system waits until the surrounding area is darker before turning on the lights.
When the setting is closer to the "Light" side, the system dims the indicator lights even when the surrounding area is relatively bright. When the setting is closer to the "Dark" side, the system waits until the surrounding area is darker before dimming the indicator lights.
When the setting is closer to the "Dark" side, the system cancels the dimming of the indicator lights even when the surrounding area is relatively dark. When the setting is closer to the "Light" side, the system waits until the surrounding area is brighter before canceling the dimming of the indicator lights.