Home › Vehicle Exterior › HORN › HORN › 2009.08–2010.08
RM1440E _59 Vehicle Exterior _056172 HORN _0274216 HORN G

HORN  HORN  INSPECTION  


PROCEDURE

Hide 86520 1.INSPECT LOW PITCHED HORN ASSEMBLY

B221681E03
2.542,1.35 2.595,1.689 2.595,1.689 2.676,1.689 false 2.696,1.593 2.883,1.769 0.187,0.176 10 *1

a.

Apply battery voltage and check the operation of the horn according to the table below.

OK:
Measurement Condition Specified Condition
Battery positive (+) → Terminal 1 Battery negative (-) → Body ground Low pitched horn sounds


If the result is not as specified, replace the low pitched horn assembly.

Text in Illustration
*1 Terminal 1


Hide 86510 2.INSPECT HIGH PITCHED HORN ASSEMBLY

B221681E03
2.542,1.35 2.595,1.689 2.595,1.689 2.676,1.689 false 2.696,1.593 2.883,1.769 0.187,0.176 10 *1

a.

Apply battery voltage and check the operation of the horn according to the table below.

OK:
Measurement Condition Specified Condition
Battery positive (+) → Terminal 1 Battery negative (-) → Body ground High Low pitched horn sounds


If the result is not as specified, replace the high pitched horn assembly.

Text in Illustration
*1 Terminal 1