Home › Vehicle Exterior › HORN › HORN › from 2010.08
RM1440E _59 Vehicle Exterior _056172 HORN _0274216 HORN G

HORN  HORN  INSPECTION  


PROCEDURE

Hide 86510 1.REMOVE HIGH PITCHED HORN ASSEMBLY

B190080E03
2.271,1.125 3.005,1.125 false 3.034,1.043 3.194,1.231 0.161,0.188 10 *1

a.

Apply battery voltage and check the operation of the horn according to the table below.

OK:
Measurement Condition Specified Condition
Battery positive (+) → Terminal 1 Battery negative (-) → Body ground High pitched horn sounds


If the result is not as specified, replace the high pitched horn assembly.

Text in Illustration
*1 Terminal 1


Hide 86520 2.INSPECT LOW PITCHED HORN ASSEMBLY

B190081E07
2.313,1.146 3.063,1.146 true 3.073,1.052 3.313,1.323 0.24,0.271 10 false *1

a.

Apply battery voltage and check the operation of the horn according to the table below.

OK:
Measurement Condition Specified Condition
Battery positive (+) → Terminal 1 Battery negative (-) → Body ground Low pitched horn sounds


If the result is not as specified, replace the low pitched horn assembly.

Text in Illustration
*1 Terminal 1