Home › Vehicle Exterior › EXTERIOR PANELS / TRIM › FRONT BUMPER › from 2013.08
RM1440E _59 Vehicle Exterior _056173 EXTERIOR PANELS / TRIM _0274217 FRONT BUMPER A

EXTERIOR PANELS / TRIM  FRONT BUMPER  REASSEMBLY  


PROCEDURE

Hide 81482C 1.INSTALL FOG LIGHT COVER LH

a.

Attach the 5 claws to install the fog light cover LH.


b.

Install the outside moulding retainer.


Hide 81481E 2.INSTALL FOG LIGHT COVER RH

HINT:

Use the same procedure as for the LH side.


Hide 81210A 4.INSTALL FOG LIGHT ASSEMBLY RH

HINT:

Use the same procedure as for the LH side.


Hide 52148B 5.INSTALL FRONT BUMPER REINFORCEMENT STOPPER RH (for RH Side)

a.

Attach the guide and 2 claws to install the front bumper reinforcement stopper RH.


Hide 53112E 6.INSTALL LOWER NO. 1 RADIATOR GRILLE

a.

Attach the 13 claws to install the lower No. 1 radiator grille.


b.

Install the clip.


Hide 52114A 7.INSTALL FRONT BUMPER EXTENSION MOUNTING BRACKET (w/ License Plate Bracket)

a.

Install the front bumper extension mounting bracket with the 2 screws.