Home › Vehicle Exterior › EXTERIOR PANELS / TRIM › REAR BUMPER › from 2013.08
RM1440E _59 Vehicle Exterior _056173 EXTERIOR PANELS / TRIM _0274219 REAR BUMPER A

EXTERIOR PANELS / TRIM  REAR BUMPER  DISASSEMBLY  


PROCEDURE

Hide 52151G 1.REMOVE REAR BUMPER EXTENSION (w/o Pintle Hook)

a.
B354486

Remove the 2 clips and 2 outside moulding retainers.


b.

Detach the 4 claws to remove the rear bumper extension.


Hide 52151G 2.REMOVE REAR BUMPER EXTENSION (w/ Pintle Hook)

a.
B353234

Remove the 2 clips and 2 outside moulding retainers.


b.

Detach the 4 claws to remove the rear bumper extension.


Hide 52186A 3.REMOVE REAR BUMPER SIDE BRACKET LH

a.
B353490

Remove the clip and 2 screws.


b.

Detach the guide to remove the rear bumper side bracket LH.


Hide 52185A 4.REMOVE REAR BUMPER SIDE BRACKET RH

HINT:

Use the same procedure as for the LH side.