Home › Vehicle Exterior › EXTERIOR PANELS / TRIM › REAR BUMPER › 2009.08–2013.08
RM1440E _59 Vehicle Exterior _056173 EXTERIOR PANELS / TRIM _0274219 REAR BUMPER A

EXTERIOR PANELS / TRIM  REAR BUMPER  REASSEMBLY  


PROCEDURE

Hide 52186A 1.INSTALL REAR BUMPER SIDE BRACKET LH

a.

Install the rear bumper side bracket with the 2 screws and clip.


Hide 52185A 2.INSTALL REAR BUMPER SIDE BRACKET RH

HINT:

Use the same procedure described for the LH side.


Hide 52707A 3.INSTALL REAR BUMPER SIDE MOULDING SUB-ASSEMBLY LH

a.

Install the rear bumper side moulding with the 5 outside moulding retainers.


Hide 52706A 4.INSTALL REAR BUMPER SIDE MOULDING SUB-ASSEMBLY RH

HINT:

Use the same procedure described for the LH side.