52164A
1.REMOVE REAR BUMPER PLATE LH
Remove the 2 outside moulding retainers.
Detach the claw remove the rear bumper plate.
52163A
2.REMOVE REAR BUMPER PLATE RH
Remove the outside moulding retainer.
Detach the claw remove the rear bumper plate.
52162B
3.REMOVE NO. 1 REAR BUMPER PLATE
Remove the outside moulding retainer.
Detach the claw and remove the No. 1 rear bumper plate.
52751A
4.REMOVE REAR BUMPER CENTER MOULDING
Remove the 6 outside moulding retainers.
Detach the 4 claws and remove the rear bumper center moulding.
52186A
5.REMOVE REAR BUMPER SIDE BRACKET LH
Remove the clip and 2 screws.
Detach the guide and remove the rear bumper side bracket.
| *1 | Guide |
52185A
6.REMOVE REAR BUMPER SIDE BRACKET RH
Use the same procedure described for the LH side.