52186A
1.INSTALL REAR BUMPER SIDE BRACKET LH
Install the rear bumper side bracket with the 2 screws and clip.
52185A
2.INSTALL REAR BUMPER SIDE BRACKET RH
Use the same procedure described for the LH side.
52751A
3.INSTALL REAR BUMPER CENTER MOULDING
Attach the 4 claws to install the rear bumper center moulding.
Install the 6 outside moulding retainers.
52162B
4.INSTALL NO. 1 REAR BUMPER PLATE
Attach the claw to install the No. 1 rear bumper plate.
Install the outside moulding retainer.
52163A
5.INSTALL REAR BUMPER PLATE RH
Attach the claw to install the rear bumper plate.
Install the outside moulding retainer.
52164A
6.INSTALL REAR BUMPER PLATE LH
Attach the claw to install the rear bumper plate.
Install the 2 outside moulding retainers.