Home › Vehicle Exterior › EXTERIOR PANELS / TRIM › ROOF RACK
RM1440E _59 Vehicle Exterior _056173 EXTERIOR PANELS / TRIM _0274224 ROOF RACK A

EXTERIOR PANELS / TRIM  ROOF RACK  INSTALLATION  


CAUTION / NOTICE / HINT

HINT:
·

Use the same procedure for the RH and LH sides.

·

The procedure listed below is for the LH side.



PROCEDURE

Hide 1.INSTALL ROOF RAIL ASSEMBLY LH

a.

Clean the threads of the bolt with non-residue solvent (when reusing the bolt).


b.

Apply adhesive to the threads of the bolt (when reusing the bolt).

Adhesive:

Toyota Genuine Adhesive 1324, Three Bond 1324 or equivalent.



c.

Install the roof rail with the 4 bolts.

Torque:
23 N*m (235 kgf*cm, 17 ft.*lbf)


Hide 63492 2.INSTALL FRONT ROOF RACK LEG COVER LH

a.

Attach the 4 claws to install the front roof rack leg cover.


Hide 63494 3.INSTALL REAR ROOF RACK LEG COVER LH

a.

Attach the 4 claws to install the rear roof rack leg cover.