Use the same procedure for the RH and LH sides.
The procedure listed below is for the LH side.
75862A
1.INSTALL NO. 2 ROCKER PANEL MOULDING PROTECTOR
Install the No. 2 rocker panel moulding protector with the 2 screws.
61429
2.INSTALL NO. 6 ROCKER PANEL REINFORCEMENT
Install the No. 6 rocker panel reinforcement with the 6 bolts.
75852
3.INSTALL ROCKER PANEL MOULDING LH
Attach the 15 clips to install the rocker panel moulding.
Install the 4 screws.
76622D
4.INSTALL FRONT FENDER MUDGUARD LH