Home › Vehicle Exterior › EXTERIOR PANELS / TRIM › ROOF DRIP SIDE FINISH MOULDING
RM1440E _59 Vehicle Exterior _056173 EXTERIOR PANELS / TRIM _0274232 ROOF DRIP SIDE FINISH MOULDING A

EXTERIOR PANELS / TRIM  ROOF DRIP SIDE FINISH MOULDING  REMOVAL  


CAUTION / NOTICE / HINT

HINT:
·

Use the same procedure for the RH and LH sides.

·

The procedure listed below is for the LH side.



PROCEDURE

Hide 1.REMOVE ROOF RAIL ASSEMBLY LH (w/ Roof Rack)

a.

Remove the roof rail assembly LH (See page Vehicle Exterior>EXTERIOR PANELS / TRIM>ROOF RACK>REMOVAL).


Hide 75596D 2.REMOVE FRONT ROOF DRIP SIDE MOULDING COVER LH (w/o Roof Rack)

HINT:

Use the same procedure to remove the front roof drip side moulding cover on the other side.


B239342E01
0.308,0.199 0.469,0.360 0.161,0.161 10 *1 0.486,0.285 0.772,0.285 0.772,0.285 1.071,0.629 false

a.

Put protective tape around the front roof drip side moulding cover.


b.

Detach the 2 claws and remove the front roof drip side moulding cover.

Text in Illustration
*1 Protective Tape


Hide 63185H 3.REMOVE ROOF RACK BRACKET (w/o Roof Rack)

HINT:

Use the same procedure to remove the roof rack bracket on the other side.


B239343

a.

Remove the 2 bolts and roof rack bracket.


Hide 75552 4.REMOVE ROOF DRIP SIDE FINISH MOULDING LH

B239344E01
1.477,0.371 1.674,0.562 0.198,0.191 10 *1 1.7,0.463 1.918,0.463 1.918,0.463 2.05,0.911 false

a.

Put protective tape around the roof drip side finish moulding.

Text in Illustration
*1 Protective Tape


b.

Detach the clip and remove the roof drip side finish moulding.

NOTICE:
·

When removing the rear roof drip side finish moulding, be careful not to damage the roof drip side finish moulding clip.

·

If the roof drip side finish moulding clip is damaged or becomes detached from the vehicle, replace it with a new one.




Hide 75556C 5.REMOVE CENTER ROOF DRIP SIDE FINISH MOULDING LH

B239345E01
1.694,0.142 1.878,0.307 0.184,0.165 10 *1 1.901,0.228 2.096,0.228 2.096,0.228 2.282,0.687 false

a.

Put protective tape around the center roof drip side finish moulding.

Text in Illustration
*1 Protective Tape


b.

Remove the center roof drip side finish moulding.


Hide 75554 6.REMOVE ROOF DRIP SIDE FINISH MOULDING LH

B239346E01
2.697,0.422 2.856,0.571 0.159,0.149 10 *1 2.68,0.508 2.521,0.508 2.521,0.508 2.396,0.84 false

a.

Put protective tape around the roof drip side finish moulding.

Text in Illustration
*1 Protective Tape


b.

Detach the clip and remove the roof drip side finish moulding.

NOTICE:
·

When removing the roof drip side finish moulding, be careful not to damage the roof drip side finish moulding clip.

·

If the roof drip side finish moulding clip is damaged or becomes detached from the vehicle, replace it with a new one.