Home › Vehicle Exterior › EXTERIOR PANELS / TRIM › BACK DOOR OUTSIDE GARNISH
RM1440E _59 Vehicle Exterior _056173 EXTERIOR PANELS / TRIM _0274234 BACK DOOR OUTSIDE GARNISH A

EXTERIOR PANELS / TRIM  BACK DOOR OUTSIDE GARNISH  REASSEMBLY  


CAUTION / NOTICE / HINT

HINT:

When installing the back door outside garnish seal, heat the back door outside garnish surface using a heat light.


Standard:
Item Temperature
Back Door Outside Garnish 20 to 30°C (68 to 86°F)


NOTICE:

Do not heat the back door outside garnish excessively.


PROCEDURE

Hide 76826A 1.INSTALL NO. 1 BACK DOOR GARNISH RETAINER

a.

Install the No. 1 back door garnish retainer with the screw.


Hide 76819 2.INSTALL BACK DOOR OUTSIDE GARNISH SEAL

a.

Clean the back door outside garnish surface.

i.

Using a heat light, heat the back door outside garnish surface.


ii.

Remove the double-sided tape from the back door outside garnish surface.


iii.

Wipe off any tape adhesive residue with cleaner.



b.

Install a new back door outside garnish seal.

i.

Remove the peeling paper from the face of a new back door outside garnish seal.

HINT:

After removing the peeling paper, keep the exposed adhesive free from foreign matter.



ii.

Install the back door outside garnish seal.



Hide 76812A 4.INSTALL NO. 2 BACK DOOR OUTSIDE GARNISH

a.

Attach the 2 clips to install the No. 2 back door outside garnish.


Hide 84840G 5.INSTALL BACK DOOR OPENER SWITCH ASSEMBLY