When removing the symbol emblem, No. 1 back door emblem, No. 2 back door name plate and No. 1 roof side mark, heat the vehicle body, symbol emblem, No. 1 back door emblem, No. 2 back door name plate and No. 1 roof side mark using a heat light.
| Item | Temperature |
|---|---|
| Vehicle Body | 40 to 60°C (104 to 140°F) |
| Symbol Emblem | 20 to 30°C (68 to 86°F) |
| No. 1 Back Door Emblem | 20 to 30°C (68 to 86°F) |
| No. 2 Back Door Name Plate | 20 to 30°C (68 to 86°F) |
| No. 1 Roof Side Mark | 20 to 30°C (68 to 86°F) |
Do not heat the vehicle body, symbol emblem, No. 1 back door emblem or No. 1 roof side mark excessively.
75741E
1.REMOVE SYMBOL EMBLEM
Put protective tape around the symbol emblem.
| *1 | Protective Tape |
| *2 | Wooden Block |
| *3 | Boss |
Insert piano wire between the vehicle body and symbol emblem.
Be careful of the boss positions.
Tie objects that can serve as handles (for example, wooden blocks) to the piano wire ends.
Pull the piano wire and scrape off the double-sided tape that holds the symbol emblem to the vehicle body.
Be careful not to damage the vehicle body.
Remove the symbol emblem.
75431A
2.REMOVE NO. 1 BACK DOOR EMBLEM
Put protective tape around the No. 1 back door emblem.
| *1 | Protective Tape |
| *2 | Wooden Block |
Insert piano wire between the vehicle body and No. 1 back door emblem.
Tie objects that can serve as handles (for example, wooden blocks) to the piano wire ends.
Pull the piano wire and scrape off the double-sided tape that holds the No. 1 back door emblem to the vehicle body.
Be careful not to damage the vehicle body.
Remove the No. 1 back door emblem.
75442A
3.REMOVE NO. 2 BACK DOOR NAME PLATE
Put protective tape around the No. 2 back door name plate.
| *1 | Protective Tape |
| *2 | Wooden Block |
Insert piano wire between the vehicle body and No. 2 back door name plate.
Tie objects that can serve as handles (for example, wooden blocks) to the piano wire ends.
Pull the piano wire and scrape off the double-sided tape that holds the No. 2 back door name plate to the vehicle body.
Be careful not to damage the vehicle body.
Remove the No. 2 back door name plate.
75455A
4.REMOVE NO. 1 ROOF SIDE MARK
Put protective tape around the No. 1 roof side mark.
| *1 | Protective Tape |
| *2 | Wooden Block |
Insert piano wire between the vehicle body and No. 1 roof side mark.
Tie objects that can serve as handles (for example, wooden blocks) to the piano wire ends.
Pull the piano wire and scrape off the double-sided tape that holds the No. 1 roof side mark to the vehicle body.
Be careful not to damage the vehicle body.
Remove the No. 1 roof side mark.