Home › Vehicle Exterior › EXTERIOR PANELS / TRIM › ROCKER PANEL MOULDING › from 2013.08
RM1440E _59 Vehicle Exterior _056173 EXTERIOR PANELS / TRIM _0274239 ROCKER PANEL MOULDING A

EXTERIOR PANELS / TRIM  ROCKER PANEL MOULDING  REMOVAL  


CAUTION / NOTICE / HINT

HINT:
·

Use the same procedure for both the RH and LH sides.

·

The procedure listed below is for the LH side.



PROCEDURE

Hide 1.REMOVE SIDE STEP ASSEMBLY LH (w/ Side Step)

a.

Hide 75852 2.REMOVE ROCKER PANEL MOULDING LH

a.

Remove the 7 retainers, clip and screw.

B239355


b.

Put protective tape around the rocker panel moulding LH.


c.

Remove the 2 screws.


d.

Detach the 7 clips to remove the rocker panel moulding LH.

B353493E01
2.262,1.848 2.431,2.017 0.169,0.169 10 *1 2.439,1.93 2.687,1.93 2.687,1.93 3.205,0.987 false

Text in Illustration
*1 Protective Tape - -


Hide 75862A 3.REMOVE NO. 2 ROCKER PANEL MOULDING PROTECTOR (w/o Side Step)

a.
B239357

Remove the 2 screws and No. 2 rocker panel moulding protector.