Use the same procedure for both the RH and LH sides.
The procedure listed below is for the LH side.
76622D
1.REMOVE FRONT FENDER MUDGUARD LH
75852
2.REMOVE ROCKER PANEL MOULDING LH
Put protective tape around the rocker panel moulding LH.
Remove the 4 screws.
Detach the 15 clips to remove the rocker panel moulding LH.
| *1 | Protective Tape | - | - |
61429
3.REMOVE NO. 6 ROCKER PANEL REINFORCEMENT
Remove the 6 bolts and No. 6 rocker panel reinforcement.