ENGINE IMMOBILISER SYSTEM > GENERAL



OUTLINE
  1. The engine immobiliser system compares the ID code that is registered in the transponder key ECU with the ID code of the transponder chip that is embedded in the ignition key. The system unsets if these ID codes match. Thus, the transponder key ECU and the ECM communicate with each other to authorize fuel injection and ignition, enabling the engine to start.

    HINT:
    When replacing the transponder key ECU or making a new key, key recognition code(s) must be registered. For details, refer to the Repair Manual for this model.

  2. The system is standard equipment on models without the smart key system.

  3. An engine immobilizer function is provided on models with the smart key system. For details, Click here.