Home › Vehicle Interior › SUPPLEMENTAL RESTRAINT SYSTEMS › OCCUPANT CLASSIFICATION SYSTEM

OCCUPANT CLASSIFICATION SYSTEM > HOW TO PROCEED WITH TROUBLESHOOTING

for Preparation Click here


HINT:
*: Use the Techstream.



1.VEHICLE BROUGHT TO WORKSHOP

    NEXT


    2.CUSTOMER PROBLEM ANALYSIS

      NEXT


      3.PASSENGER AIRBAG ON/OFF INDICATOR CHECK

        NEXT


        4.CHECK DTC (Present and Past DTCs)*
        1. Check for DTCs (Click here).

          Result:

          Result
          Proceed to
          DTC is output.
          A
          DTC is not output.
          B



        B.
        GO TO PROBLEM SYMPTOMS TABLE (Click here)
        A


        5.DTC CHART

          NEXT


          6.CIRCUIT INSPECTION*

            NEXT


            7.REPAIR

              NEXT


              8.CLEAR DTCS (Present and Past DTCs)*
              1. Clear the DTCs (Click here).


              NEXT


              9.CHECK DTC (Present and Past DTCs)*
              1. Check for DTCs (Click here).

                Result:

                Result
                Proceed to
                DTC is not output.
                A
                DTC is output.
                B



              B.
              Go to step 5
              A


              10.SYMPTOM SIMULATION
              1. Check the passenger airbag ON/OFF indicator condition.

                Result:

                Result
                Proceed to
                Passenger airbag ON/OFF indicator is operating normally.
                A
                Passenger airbag ON/OFF indicator ("OFF") and SRS warning light come on.
                B



              B.
              Go to step 5
              A


              11.CONFIRMATION TEST

                NEXT

                END