Home › Audio / Visual / Telematics › AUDIO / VIDEO › BACK DOOR SPEAKER

BACK DOOR SPEAKER > INSTALLATION

for Preparation Click here


HINT:
  1. Use the same procedure for the RH and LH sides.
  2. The procedure listed below is for the LH side.



1. INSTALL REAR NO. 2 SPEAKER ASSEMBLY
  1. Temporarily install the speaker by attaching the 2 claws of the speaker to the door panel.

  1. Install the speaker with the 3 screws.

    Torque:
    2.5 N*m{ 25 kgf*cm , 22 in.*lbf }

  1. Connect the connector.

    NOTICE:
    Do not touch the cone of the speaker.



2. INSTALL BACK DOOR TRIM PANEL ASSEMBLY


    B240234
  1. Attach the 12 clips to install the back door trim panel assembly.



3. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

NOTICE:
When disconnecting the cable, some systems need to be initialized after the cable is reconnected (Click here).