Home › Brake › BRAKE CONTROL / DYNAMIC CONTROL SYSTEMS › VEHICLE STABILITY CONTROL SYSTEM

DTC    C1203    ECM Communication Circuit Malfunction

for Preparation Click here


DESCRIPTION

The circuit is used to send control information from the skid control ECU to the ECM, and engine control information from the ECM to the skid control ECU via the CAN communication system.

DTC Code
DTC Detection Condition
Trouble Area
C1203
The engine/drivetrain specification and/or destination information from the ECM does not match the skid control ECU data.
ECM

INSPECTION PROCEDURE

1.CHECK DTC (ENGINE CONTROL SYSTEM)
  1. Check if any DTC is recorded for the engine control system (Click here).
    Result 
    Result
    Proceed to
    DTC is not output
    A
    DTC is output
    B



B
GO TO ENGINE CONTROL SYSTEM (HOW TO PROCEED WITH TROUBLESHOOTING) (Click here)
A

REPLACE ECM (Click here)