Home › Engine / Hybrid System › 1GR-FE ENGINE CONTROL › ECM

ECM > REMOVAL

for Preparation Click here



1. REMOVE LOWER INSTRUMENT PANEL SUB-ASSEMBLY
  1. Remove the lower instrument panel (Click here).



2. REMOVE ECM


A221985
  1. Disconnect the 6 connectors.

  1. Remove the bolt, nut and ECM.



3. REMOVE ECM BRACKET


A221987
  1. Remove the 2 screws and ECM bracket.



4. REMOVE NO. 2 ECM BRACKET


A221988
  1. Remove the 2 screws and No. 2 ECM bracket.