Home › Drivetrain ยท DRIVE SHAFT / PROPELLER SHAFT › FRONT PROPELLER SHAFT ASSEMBLY

FRONT PROPELLER SHAFT ASSEMBLY > REMOVAL

for Preparation Click here



1. REMOVE FRONT EXHAUST PIPE
  1. Remove the front exhaust pipe (Click here).



2. REMOVE FRONT PROPELLER SHAFT ASSEMBLY


    C098708E07
  1. Place matchmarks on the propeller shaft flange and differential.
    Text in Illustration 
    *a
    Matchmark

  1. Remove the 4 nuts and 4 bolts.



    C098709E07
  1. Place matchmarks on the propeller shaft flange and transfer flange.
    Text in Illustration 
    *a
    Matchmark

  1. Remove the 4 nuts, 4 washers and front propeller shaft assembly.