Home › Audio / Visual / Telematics › AUDIO / VIDEO › SATELLITE RADIO ANTENNA

SATELLITE RADIO ANTENNA > INSTALLATION

for Preparation Click here



1. INSTALL SATELLITE RADIO ANTENNA ASSEMBLY


    B240465
  1. Align the positioning pin of the satellite radio antenna assembly with the hole to temporarily install the satellite radio antenna assembly on the vehicle.

  1. Attach the 2 claws to install the satellite radio antenna assembly.

  1. Connect the connector.

  1. Install the antenna nut.

    Torque:
    4.5 N*m{ 46 kgf*cm , 40 in.*lbf }



2. INSTALL ROOF HEADLINING ASSEMBLY
(Click here)


3. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

NOTICE:
When disconnecting the cable, some systems need to be initialized after the cable is reconnected (Click here).



4. CHECK SRS WARNING LIGHT
(Click here)