Home › Audio / Visual / Telematics › CELLULAR COMMUNICATION › MAYDAY BATTERY

MAYDAY BATTERY > REMOVAL

for Preparation Click here



1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

NOTICE:
When disconnecting the cable, some systems need to be initialized after the cable is reconnected (Click here).



2. REMOVE MAYDAY BATTERY WITH BRACKET


    B246329
  1. Detach the 4 claws and remove the cover.



    B246330
  1. Remove the bolt and detach the 2 claws.



    B246331
  1. Move the mayday battery with bracket as shown in the illustration.

  1. Disconnect the connector and remove the mayday battery with bracket.



3. REMOVE MAYDAY BATTERY


    B242129
  1. Remove the bracket from the mayday battery.