ELECTRICAL KEY OSCILLATOR (for Luggage Compartment) > INSTALLATION |
| 1. INSTALL INDOOR NO. 2 ELECTRICAL KEY ANTENNA ASSEMBLY |
![]() |
Attach the 2 claws to install the indoor No. 2 electrical key antenna.
Connect the connector.
| 2. INSTALL NO. 1 LUGGAGE COMPARTMENT TRIM COVER |
Install the luggage hold belt striker and No. 2 luggage compartment trim cover with the bolt.
Attach the 2 claws to close the cover.
| 3. INSTALL REAR FLOOR PAD (w/o Deck Board) |
Install the rear floor pad.
| 4. INSTALL REAR FLOOR CARPET ASSEMBLY (w/o Deck Board) |
Attach the 4 claws to install the rear floor carpet assembly.
| 5. INSTALL REAR FLOOR CARPET ASSEMBLY (w/ Deck Board) |
Attach the 4 claws to install the rear floor carpet.
| 6. INSTALL REAR FLOOR MAT REAR SUPPORT PLATE |
Attach the 5 clips to install the rear floor mat rear support plate.
| 7. INSTALL INNER FLOOR SIDE RAIL SUB-ASSEMBLY (w/ Deck Board) |
Install the inner floor side rail sub-assembly with the 4 bolts.
| 8. INSTALL DECK BOARD ASSEMBLY (w/ Deck Board) |
Attach the 2 guides to install the deck board assembly.
Install the 6 bolts.
| 9. INSTALL LUGGAGE COMPARTMENT SIDE COVER SUB-ASSEMBLY LH (w/ Deck Board) |
Attach the 4 clips and 2 guides to install the luggage compartment side cover sub-assembly LH.
| 10. INSTALL LUGGAGE COMPARTMENT SIDE COVER SUB-ASSEMBLY RH (w/ Deck Board) |
| 11. INSTALL REAR NO. 2 FLOOR BOARD ASSEMBLY (w/ Deck Board) |
Attach the 3 clips to install the rear No. 2 floor board assembly.
| 12. INSTALL NO. 2 DECK BOARD SUB-ASSEMBLY (w/o Deck Board) |
Attach the 2 clips and 2 guides to install the No. 2 deck board sub-assembly.
| 13. INSTALL NO. 2 LUGGAGE COMPARTMENT TRIM COVER (w/ Deck Board, w/o Rear No. 2 Seat) |
Install the luggage hold belt striker and No. 2 luggage compartment trim cover with the bolt.
Attach the 2 claws to close the cover.
| 14. INSTALL NO. 1 DECK BOARD SUB-ASSEMBLY (w/o Deck Board) |
Attach the clip to install the No. 1 deck board sub-assembly.
| 15. INSTALL NO. 1 LUGGAGE COMPARTMENT TRIM COVER (w/o Deck Board) |
Install the luggage hold belt striker and No. 1 luggage compartment trim cover with the bolt.
Attach the 4 claws to close the cover.
| 16. INSTALL REAR NO. 2 SEAT ASSEMBLY (w/ Rear No. 2 Seat) |
Install the rear No. 2 seat assembly (Click here).