ELECTRICAL KEY OSCILLATOR (for Luggage Compartment) > REMOVAL |
| 1. REMOVE REAR NO. 2 SEAT ASSEMBLY |
Remove the rear No. 2 seat assembly (Click here).
| 2. REMOVE NO. 1 LUGGAGE COMPARTMENT TRIM COVER (w/o Deck Board) |
![]() |
Detach the 4 claws to open the cover.
![]() |
Remove the bolt, luggage hold belt striker and No. 1 luggage compartment trim cover.
| *1 | Luggage Hold Belt Striker |
| 3. REMOVE NO. 1 DECK BOARD SUB-ASSEMBLY (w/o Deck Board) |
![]() |
Detach the clip to remove the No. 1 deck board sub-assembly.
| 4. REMOVE NO. 2 LUGGAGE COMPARTMENT TRIM COVER (w/ Deck Board, w/o Rear No. 2 Seat) |
![]() |
Detach the 2 claws to open the cover.
![]() |
Remove the bolt, luggage hold belt striker and No. 2 luggage compartment trim cover.
| *1 | Luggage Hold Belt Striker |
| 5. REMOVE NO. 2 DECK BOARD SUB-ASSEMBLY (w/o Deck Board) |
![]() |
Detach the 2 clips and 2 guides to remove the No. 2 deck board sub-assembly.
| 6. REMOVE REAR NO. 2 FLOOR BOARD ASSEMBLY (w/ Deck Board) |
![]() |
Detach the 3 clips to remove the rear No. 2 floor board assembly.
| 7. REMOVE LUGGAGE COMPARTMENT SIDE COVER SUB-ASSEMBLY LH (w/ Deck Board) |
![]() |
Using a screwdriver, detach the 4 clips and 2 guides to remove the luggage compartment side cover sub-assembly LH.
| *1 | Protective Tape |
| 8. REMOVE LUGGAGE COMPARTMENT SIDE COVER SUB-ASSEMBLY RH (w/ Deck Board) |
| 9. REMOVE DECK BOARD ASSEMBLY (w/ Deck Board) |
![]() |
Remove the 6 bolts.
Detach the 2 guides to remove the deck board assembly.
| 10. REMOVE INNER FLOOR SIDE RAIL SUB-ASSEMBLY (w/ Deck Board) |
![]() |
Remove the 4 bolts and inner floor side rail sub-assembly.
| 11. REMOVE REAR FLOOR MAT REAR SUPPORT PLATE |
![]() |
Detach the 5 clips to remove the rear floor mat rear support plate.
| 12. REMOVE REAR FLOOR CARPET ASSEMBLY (w/ Deck Board) |
Detach the 4 claws and remove the rear floor carpet.
| 13. REMOVE REAR FLOOR CARPET ASSEMBLY (w/o Deck Board) |
![]() |
Detach the 4 claws to remove the rear floor carpet assembly.
| 14. REMOVE REAR FLOOR PAD (w/o Deck Board) |
Remove the rear floor pad.
| 15. REMOVE NO. 1 LUGGAGE COMPARTMENT TRIM COVER |
![]() |
Detach the 2 claws to open the cover.
![]() |
Remove the bolt, luggage hold belt striker and No. 2 luggage compartment trim cover.
| *1 | Luggage Hold Belt Striker |
| 16. REMOVE INDOOR NO. 2 ELECTRICAL KEY ANTENNA ASSEMBLY |
![]() |
Disconnect the connector.
Detach the 2 claws and remove the indoor No. 2 electrical key antenna.