Home › Vehicle Interior › THEFT DETERRENT / KEYLESS ENTRY › ELECTRICAL KEY OSCILLATOR (for Rear Floor)

ELECTRICAL KEY OSCILLATOR (for Rear Floor) > REMOVAL

for Preparation Click here



1. REMOVE REAR NO. 2 SEAT ASSEMBLY
  1. Remove the rear No. 2 seat assembly (Click here).



2. REMOVE REAR NO. 1 FLOOR STEP COVER (w/ Rear No. 2 Seat)


    B238730E01
  1. Using a screwdriver, detach the 2 claws to remove the rear No. 1 floor step cover.
    Text in Illustration 
    *1
    Protective Tape

    HINT:
    1. Tape the screwdriver tip before use.
    2. Use the same procedure for all the rear No. 1 floor step covers.



3. REMOVE QUARTER SCUFF PLATE LH (w/ Rear No. 2 Seat)


    B238731
  1. Remove the 2 bolts and quarter scuff plate LH.



4. REMOVE QUARTER SCUFF PLATE RH (w/ Rear No. 2 Seat)

HINT:
Use the same procedure as for the LH side.



5. REMOVE REAR DOOR SCUFF PLATE LH
  1. Put protective tape around the rear door scuff plate LH.



    B240011E02
  1. Using a screwdriver, detach the 3 clips, 6 claws and 2 guides to remove the rear door scuff plate LH.
    Text in Illustration 
    *1
    Protective Tape

    HINT:
    Tape the screwdriver tip before use.



6. REMOVE REAR DOOR SCUFF PLATE RH

HINT:
Use the same procedure as for the LH side.



7. REMOVE REAR DOOR OPENING TRIM WEATHERSTRIP LH


    B240009
  1. Remove the rear door opening trim weatherstrip LH.



8. REMOVE REAR DOOR OPENING TRIM WEATHERSTRIP RH

HINT:
Use the same procedure as for the LH side.



9. REMOVE NO. 1 LUGGAGE COMPARTMENT TRIM COVER (w/o Deck Board)


    B240044
  1. Detach the 4 claws to open the cover.



    B240045E01
  1. Remove the bolt, luggage hold belt striker and No. 1 luggage compartment trim cover.
    Text in Illustration 
    *1
    Luggage Hold Belt Striker

    HINT:
    Use the same procedure for the other No. 1 luggage compartment trim cover.



10. REMOVE NO. 1 DECK BOARD SUB-ASSEMBLY (w/o Deck Board)


    B240046
  1. Detach the clip to remove the No. 1 deck board sub-assembly.



11. REMOVE NO. 2 LUGGAGE COMPARTMENT TRIM COVER (w/ Deck Board, w/o Rear No. 2 Seat)


    B240048
  1. Detach the 2 claws to open the cover.



    B240049E01
  1. Remove the bolt, luggage hold belt striker and No. 2 luggage compartment trim cover.
    Text in Illustration 
    *1
    Luggage Hold Belt Striker

    HINT:
    Use the same procedure for the other No. 2 luggage compartment trim cover.



12. REMOVE NO. 2 DECK BOARD SUB-ASSEMBLY (w/o Deck Board)


    B240064
  1. Detach the 2 clips and 2 guides to remove the No. 2 deck board sub-assembly.



13. REMOVE REAR NO. 2 FLOOR BOARD ASSEMBLY (w/ Deck Board)


    B240065
  1. Detach the 3 clips to remove the rear No. 2 floor board assembly.



14. REMOVE LUGGAGE COMPARTMENT SIDE COVER SUB-ASSEMBLY LH (w/ Deck Board)


    B240062E01
  1. Using a screwdriver, detach the 4 clips and 2 guides to remove the luggage compartment side cover sub-assembly LH.
    Text in Illustration 
    *1
    Protective Tape

    HINT:
    Tape the screwdriver tip before use.



15. REMOVE LUGGAGE COMPARTMENT SIDE COVER SUB-ASSEMBLY RH (w/ Deck Board)

HINT:
Use the same procedure as for the LH side.



16. REMOVE DECK BOARD ASSEMBLY (w/ Deck Board)


    B353466
  1. Remove the 6 bolts.

  1. Detach the 2 guides to remove the deck board assembly.



17. REMOVE INNER FLOOR SIDE RAIL SUB-ASSEMBLY (w/ Deck Board)


    B353467
  1. Remove the 4 bolts and inner floor side rail sub-assembly.



18. REMOVE REAR FLOOR MAT REAR SUPPORT PLATE


    B240050
  1. Detach the 5 clips to remove the rear floor mat rear support plate.



19. REMOVE REAR FLOOR CARPET ASSEMBLY (w/ Deck Board)
  1. Detach the 4 claws and remove the rear floor carpet.



20. REMOVE REAR FLOOR CARPET ASSEMBLY (w/o Deck Board)


    B240047
  1. Detach the 4 claws to remove the rear floor carpet assembly.



21. REMOVE REAR FLOOR PAD (w/o Deck Board)
  1. Remove the rear floor pad.



22. REMOVE REAR NO. 1 SEAT OUTER LAP BELT ANCHOR COVER


    B240053
  1. Detach the 3 claws to remove the rear No. 1 seat outer lap belt anchor cover.

    HINT:
    Use the same procedure for the other rear No. 1 seat outer lap belt anchor cover.



23. REMOVE NO. 1 LUGGAGE COMPARTMENT TRIM HOOK


    B181695
  1. Remove the No. 1 luggage compartment trim hook by turning it clockwise.

    HINT:
    Use the same procedure for the other No. 1 luggage compartment trim hook.



24. REMOVE FRONT DECK SIDE TRIM COVER LH


    B240051E01
  1. Using a screwdriver, detach the 2 claws to remove the front deck side trim cover LH.
    Text in Illustration 
    *1
    Protective Tape

    HINT:
    Tape the screwdriver tip before use.



25. REMOVE FRONT DECK SIDE TRIM COVER RH

HINT:
Use the same procedure as for the LH side.



26. REMOVE NO. 1 LUGGAGE COMPARTMENT TRIM COVER


    B240048
  1. Detach the 2 claws to open the cover.



    B240049E01
  1. Remove the bolt, luggage hold belt striker and No. 2 luggage compartment trim cover.
    Text in Illustration 
    *1
    Luggage Hold Belt Striker

    HINT:
    Use the same procedure for the other No. 2 luggage compartment trim cover.



27. REMOVE DECK TRIM SIDE PANEL ASSEMBLY LH


  1. w/o Rear No. 2 Seat:



      B240054
    1. Remove the bolt to disconnect the rear No. 1 seat outer belt floor anchor.

    2. Remove the 3 bolts and 2 screws.



    3. Detach the 7 clips, 5 claws and 2 guides.


      B240058



    4. B238756
    5. Detach the 6 claws and 2 guides and pass the rear seatback lock control lever base through the deck trim side panel assembly LH to remove the deck trim side panel assembly LH.



  1. w/ Rear No. 2 Seat:



      B240054
    1. Remove the bolt and disconnect the rear No. 1 seat outer belt floor anchor.



    2. B240052
    3. Remove the bolt to disconnect the rear No. 2 seat outer belt floor anchor.

    4. Remove the 3 bolts and 2 screws.



    5. Detach the 7 clips, 5 claws and 2 guides to remove the deck trim side panel assembly LH.


      B240060



28. REMOVE DECK TRIM SIDE PANEL ASSEMBLY RH


  1. w/o Rear No. 2 Seat:



      B240057
    1. Remove the bolt to disconnect the rear No. 1 seat outer belt floor anchor.

    2. Remove the 3 bolts and screw.



    3. Detach the 7 clips, 5 claws and 2 guides.


      B240059

    4. Disconnect each connector.



    5. B238823
    6. Detach the 6 claws and 2 guides and pass the rear seatback lock control lever base through the deck trim side panel assembly RH to remove the deck trim side panel assembly RH.



  1. w/ Rear No. 2 Seat:



      B240057
    1. Remove the bolt and disconnect the rear No. 1 seat outer belt floor anchor.



    2. B240055
    3. Remove the bolt and disconnect the rear No. 2 seat outer belt floor anchor.

    4. Remove the 3 bolts and screw.

    5. Detach the 7 clips, 5 claws and 2 guides.



    6. Disconnect each connector and remove the deck trim side panel assembly RH.


      B240061



29. REMOVE INDOOR NO. 2 ELECTRICAL KEY ANTENNA ASSEMBLY
  1. Fold back the front floor carpet assembly.



    B237299
  1. Disconnect the connector.

  1. Detach the 2 claws and remove the indoor No. 2 electrical key antenna.