Home › Vehicle Exterior › WIPER / WASHER › WIPER SWITCH

WIPER SWITCH > INSTALLATION

for Preparation Click here



1. INSTALL WINDSHIELD WIPER SWITCH ASSEMBLY
  1. Attach the claw to install the windshield wiper switch assembly.

  1. Connect the 2 connectors.



2. INSTALL UPPER STEERING COLUMN COVER
  1. Attach the claw to install the upper steering column cover.

  1. Attach the 4 clips to install the upper steering column cover to the instrument cluster finish panel.



3. INSTALL LOWER STEERING COLUMN COVER
  1. Attach the 2 claws to install the lower steering column cover.

  1. Turn the steering wheel to the right and left and install the 2 screws.



4. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

NOTICE:
When disconnecting the cable, some systems need to be initialized after the cable is reconnected (Click here).