Home › Vehicle Exterior › WIPER / WASHER › WIPER SWITCH

WIPER SWITCH > REMOVAL

for Preparation Click here



1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

NOTICE:
When disconnecting the cable, some systems need to be initialized after the cable is reconnected (Click here).



2. REMOVE LOWER STEERING COLUMN COVER


    E198967
  1. Turn the steering wheel to the left and remove the screw.



    E198975
  1. Turn the steering wheel to the right and remove the screw.



    E201333
  1. Detach the 2 claws and remove the lower steering column cover.



3. REMOVE UPPER STEERING COLUMN COVER


    E201335
  1. Detach the 4 clips and claw and remove the steering column cover.



4. REMOVE WINDSHIELD WIPER SWITCH ASSEMBLY


    E199013
  1. Disconnect the 2 connectors.

  1. Detach the claw and remove the windshield wiper switch assembly.