FRONT BUMPER (w/ Intuitive Parking Assist System) > INSTALLATION |
| 1. INSTALL FRONT BUMPER BRACKET SUB-ASSEMBLY LH |
Install the front bumper bracket sub-assembly LH with the 2 bolts.
| 2. INSTALL FRONT BUMPER BRACKET SUB-ASSEMBLY RH |
| 3. INSTALL FRONT BUMPER SIDE SUPPORT LH |
Attach the 2 claws to install the front bumper side support LH.
Install the screw and bolt.
| 4. INSTALL FRONT BUMPER SIDE SUPPORT RH |
| 5. INSTALL NO. 2 FRONT BUMPER EXTENSION SUB-ASSEMBLY LH |
Install the No. 2 front bumper extension sub-assembly LH with the 4 bolts.
| 6. INSTALL NO. 2 FRONT BUMPER EXTENSION SUB-ASSEMBLY RH |
| 7. INSTALL FRONT BUMPER REINFORCEMENT SUB-ASSEMBLY |
Install the front bumper reinforcement sub-assembly with the 6 nuts and screw.
| 8. INSTALL FRONT BUMPER ENERGY ABSORBER |
Install the front bumper energy absorber.
| 9. INSTALL RADIATOR SIDE DEFLECTOR LH |
Attach the 3 claws.
Install the radiator side deflector LH with the clip.
| 10. INSTALL RADIATOR SIDE DEFLECTOR RH |
Attach the 3 claws.
Install the radiator side deflector RH with the clip.
| 11. INSTALL AIR INTAKE DUCT LH |
Install the air intake duct LH with the 2 screws.
Install the clip and bolt.
| 12. INSTALL AIR INTAKE DUCT RH |
| 13. INSTALL FRONT BUMPER LOWER COVER |
Install the front lower bumper cover with the 4 bolts and clip.
| 14. INSTALL COOL AIR INTAKE DUCT (for 4WD) |
Install the cool air intake duct with the 4 clips.
| 15. INSTALL UPPER CENTER FRONT BUMPER RETAINER |
Install the upper front bumper retainer with the 3 bolts and 2 screws.
| 16. INSTALL FRONT BUMPER COVER |
Connect the 3 connectors.
Attach the 14 claws to install the front bumper cover with radiator grille.
Install the 3 bolts, 10 screws and 6 clips.
| 17. INSTALL UPPER RADIATOR SUPPORT SEAL |
Install the upper radiator support seal with the 13 clips.
| 18. ADJUST FOG LIGHT AIMING |