Home › Vehicle Interior › SEAT BELT › FRONT SEAT INNER BELT ASSEMBLY

FRONT SEAT INNER BELT ASSEMBLY > INSTALLATION

for Preparation Click here


HINT:
  1. Use the same procedure for the RH and LH sides.
  2. The procedure listed below is for the LH side.



1. INSTALL FRONT SEAT INNER BELT ASSEMBLY LH


    B241692E01
  1. Install the front seat inner belt with the nut.

    Torque:
    42 N*m{ 428 kgf*cm , 31 ft.*lbf }

    NOTICE:
    Do not allow the anchor part of the front seat inner belt assembly to overlap the protruding parts of the front seat adjuster.

    Text in Illustration 
    *a
    Protruding Part

  1. for Driver Side:
    Connect the connector and attach the 4 clamps.

  1. for Passenger Side:
    Connect the connector and attach the clamp.



2. INSTALL FRONT SEAT ASSEMBLY LH
  1. for Manual Seat:
    Install the front seat assembly LH (Click here).

  1. for Power Seat:
    Install the front seat assembly LH (Click here).