Home › Vehicle Interior › LIGHTING (INT) › VANITY LIGHT

VANITY LIGHT > REMOVAL

for Preparation Click here


HINT:
  1. Use the same procedure for the RH and LH sides.
  2. The procedure listed below is for the LH side.



1. REMOVE ROOF HEADLINING ASSEMBLY
  1. Remove the roof headlining assembly (Click here).



2. REMOVE VANITY LIGHT ASSEMBLY LH


B175184E02
  1. Detach the 2 claws (A) and separate the bulb holder from the vanity light as shown in the illustration.

  1. Detach the claw (B) and remove the vanity light.
    Text in Illustration 
    *1
    Claw A
    *2
    Claw B
    *3
    Bulb Holder



3. REMOVE VANITY LIGHT BULB
  1. Remove the bulb.