Home › Vehicle Interior › SUPPLEMENTAL RESTRAINT SYSTEMS › FRONT PASSENGER AIRBAG ASSEMBLY

FRONT PASSENGER AIRBAG ASSEMBLY > REMOVAL

for Preparation Click here



1. REMOVE INSTRUMENT PANEL SUB-ASSEMBLY
  1. Remove the instrument panel sub-assembly (Click here).



2. REMOVE NO. 2 INSTRUMENT PANEL WIRE


    B240172
  1. Detach the clamp.

  1. Disconnect the 2 connectors and remove the wire.

    NOTICE:
    When handling the airbag connector, take care not to damage the airbag wire harness.



3. REMOVE INSTRUMENT PANEL PASSENGER AIRBAG ASSEMBLY


    B240173
  1. Remove the 2 screws.



    B240174E01
  1. Detach the 5 hooks (A).
    Text in Illustration 
    *a
    Hook A
    *b
    Hook B

  1. Detach the 5 hooks (B) and remove the instrument panel passenger airbag.