Home › Vehicle Interior › SUPPLEMENTAL RESTRAINT SYSTEMS › CENTER AIRBAG SENSOR ASSEMBLY

CENTER AIRBAG SENSOR ASSEMBLY > REMOVAL

for Preparation Click here



1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

CAUTION:
Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to disable the SRS system.

NOTICE:
When disconnecting the cable, some systems need to be initialized after the cable is reconnected (Click here).



2. REMOVE REAR CONSOLE BOX ASSEMBLY
  1. Remove the rear console box sub-assembly (Click here).



3. REMOVE AIRBAG SENSOR ASSEMBLY


    B240195
  1. Disconnect the connector.

  1. Remove the 3 bolts and airbag sensor.