Home › Vehicle Interior › SEAT BELT › REAR NO. 2 SEAT INNER BELT ASSEMBLY

REAR NO. 2 SEAT INNER BELT ASSEMBLY > INSTALLATION

for Preparation Click here


HINT:
A bolt without a torque specification is shown in the standard bolt chart (Click here).



1. INSTALL REAR NO. 2 SEAT INNER BELT SUB-ASSEMBLY
  1. Using a T45 "TORX" socket wrench, install the inner belt assembly with the bolt.

    Torque:
    42 N*m{ 428 kgf*cm , 31 ft.*lbf }



2. INSTALL REAR SEAT LOWER CUSHION HINGE COVER RH
  1. Attach the guide and 2 claws to install the cover.

  1. Install the 2 screws.



3. INSTALL REAR NO. 2 SEAT ASSEMBLY LH
  1. Install the rear No. 2 seat assembly LH (Click here).