AUTOMATIC LIGHT CONTROL SENSOR > INSTALLATION |
| 1. INSTALL AUTOMATIC LIGHT CONTROL SENSOR |
![]() |
Attach the 2 claws to install the sensor.
Connect the connector.
| 2. INSTALL NO. 3 HEATER TO REGISTER DUCT |
Attach the claw.
Install the No. 3 heater to register duct with the 2 screws.
| 3. INSTALL NO. 1 SIDE DEFROSTER NOZZLE DUCT |
Attach the 2 claws.
Install the No. 1 side defroster nozzle duct with the screw.
| 4. INSTALL NO. 2 SIDE DEFROSTER NOZZLE DUCT |
Attach the 2 claws.
Install the No. 2 side defroster nozzle duct with the screw.
| 5. INSTALL NO. 1 HEATER TO REGISTER DUCT |
Install the No. 1 heater to register duct with the 4 screws.
| 6. INSTALL NO. 2 HEATER TO REGISTER DUCT |
Install the No. 2 heater to register duct with the 4 screws.
| 7. INSTALL INSTRUMENT PANEL SUB-ASSEMBLY |
Install the instrument panel sub-assembly (Click here).