Home › Engine / Hybrid System › CRUISE CONTROL › CRUISE CONTROL SYSTEM

DTC    P0575    Cruise Control Input Circuit

for Preparation Click here


DESCRIPTION

This DTC indicates the presence of internal abnormalities in the ECM.

DTC Code
DTC Detection
Condition Trouble Area
P0575
Either condition is met:
  1. The cruise control input signal is abnormal.
  2. The stop light switch input signal is abnormal.
ECM

INSPECTION PROCEDURE

HINT:
The ECM receives signals from each sensor to control all functions of the cruise control system. When a trouble code is stored, the fail-safe function remains on until the ignition switch is turned off.

1.CHECK FOR DTC
  1. Clear the DTCs (Click here).

  1. Check for DTCs (Click here).

    OK:
    DTC P0575 is not output.

    Result 
    Result
    Proceed to
    OK
    A
    NG
    B



B
REPLACE ECM (Click here)
A

USE SIMULATION METHOD TO CHECK (Click here)