Home › Suspension › SUSPENSION CONTROL › KINETIC DYNAMIC SUSPENSION SYSTEM

DTC    C1881/81    KDSS ECU Malfunction

for Preparation Click here


DESCRIPTION

The stabilizer control ECU stores DTC C1881/81 when internal ECU malfunctions occur.

DTC Code
DTC Detection Condition
Trouble Area
C1881/81
Either condition is met:
  1. A nonvolatile memory error occurs.
  2. A malfunction occurs in the message register used for CAN communication.
Stabilizer control ECU

INSPECTION PROCEDURE

1.CHECK DTC
  1. Clear the DTCs (Click here).

  1. Check for DTCs (Click here).
    Result 
    Result
    Proceed to
    DTC is output
    A
    DTC is not output
    B



B
USE SIMULATION METHOD TO CHECK (Click here)
A

REPLACE STABILIZER CONTROL ECU (Click here)