FRONT SEAT ASSEMBLY (for Manual Seat) > REMOVAL |
| 1. PRECAUTION |
| 2. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL |
| 3. REMOVE FRONT SEAT HEADREST ASSEMBLY |
Remove the front seat headrest assembly.
| 4. REMOVE FRONT SEAT INNER TRACK BRACKET COVER RH |
Operate the seat track adjusting handle to move the front seat assembly to the rearmost position.
![]() |
Using a moulding remover, detach the 2 claws.
Move the front seat inner track bracket cover RH in the direction of the arrow to detach the 2 guides and remove the front seat inner track bracket cover RH.
| 5. REMOVE FRONT SEAT OUTER TRACK BRACKET COVER RH |
![]() |
Using a moulding remover, detach the 2 claws.
Move the front seat outer track bracket cover RH in the direction of the arrow to detach the 2 claws and guide and remove the front seat outer track bracket cover RH.
| 6. REMOVE INNER SEAT TRACK BRACKET COVER RH |
Operate the seat track adjusting handle to move the front seat assembly to the foremost position.
![]() |
Using a moulding remover, detach the 2 claws.
Move the inner seat track bracket cover RH in the direction of the arrow to detach the 2 guides and remove the inner seat track bracket cover RH.
| 7. REMOVE OUTER SEAT TRACK COVER RH |
![]() |
Using a moulding remover, detach the 2 claws.
Move the outer seat track cover RH in the direction of the arrow to detach the 4 guides and remove the outer seat track cover RH.
| 8. REMOVE FRONT SEAT ASSEMBLY |
![]() |
Remove the 2 bolts.
Operate the seat track adjusting handle to move the front seat assembly to the rearmost position.
![]() |
Remove the 2 bolts.
Operate the seat track adjusting handle to move the front seat assembly to the center position, and operate the reclining adjuster release handle RH and move the seatback to the upright position.
Disconnect the connectors under the seat.
Remove the front seat assembly.