Home › Vehicle Interior › SEAT BELT › REAR CENTER SEAT INNER BELT ASSEMBLY (for 60/40 Split Slide Walk-in Seat Type RH Side)

REAR CENTER SEAT INNER BELT ASSEMBLY (for 60/40 Split Slide Walk-in Seat Type RH Side) > REMOVAL

for Preparation Click here


CAUTION:
Wear protective gloves. Sharp areas on the parts may injure your hands.



1. REMOVE REAR SEAT ASSEMBLY RH
  1. Remove the rear seat assembly RH (Click here).



2. REMOVE REAR SEAT INNER BELT ASSEMBLY


B241739
  1. Remove the nut and inner belt.