Home › Audio / Visual / Telematics › CELLULAR COMMUNICATION › SAFETY CONNECT SYSTEM

DTC    B15A8    Telematics Transceiver Malfunction

for Preparation Click here


DESCRIPTION

This DTC is stored when an error in EEPROM or PLL IC is detected during the DCM (Telematics Transceiver) self-check. The EEPROM (Electrically Erasable Programmable Read-Only Memory) stores the various data to operate Safety Connect. The PLL IC (Phase-Locked Loop Integrated Circuit) oscillates the telephone radio frequency.

DTC Code
DTC Detection Condition
Trouble Area
B15A8
An error in EEPROM or PLL IC is detected.
DCM (Telematics Transceiver)

INSPECTION PROCEDURE

NOTICE:
Regardless of whether DTC B15A8 has been output as a present or history DTC, the DCM (Telematics Transceiver) should be replaced.

1.PERFORM DCM (TELEMATICS TRANSCEIVER)
  1. Replace the DCM (Telematics Transceiver) (Click here).

    NOTICE:
    1. The ignition switch must be off.
    2. Do not replace the DCM (Telematics Transceiver) with one from another vehicle.


NEXT

PERFORM DCM ACTIVATION (Click here)