FRONT SEAT SIDE AIRBAG ASSEMBLY > INSTALLATION |
| 1. INSTALL FRONT SEAT SIDE AIRBAG ASSEMBLY |
Using an E10 "TORX" socket wrench, install the front seat side airbag assembly with 2 new nuts.
Attach the 2 clamps to connect the front seat side airbag wire harness.
| 2. INSTALL SEPARATE TYPE FRONT SEATBACK COVER WITH PAD (for Manual Seat) |
Install the separate type front seatback cover with pad to the separate type front seatback spring assembly.
Attach the 4 claws to install the 2 front seat headrest supports.
Attach the 2 hooks to connect the separate type front seatback cover bracket to the separate type front seatback spring assembly with the nut.
![]() |
Close the 2 fasteners and separate type front seatback cover.
![]() |
Using hog ring pliers, install 3 new hog rings.
| *1 | Hog Ring Pliers |
Attach the fastening tape to connect the airbag wire harness.
Attach the 3 airbag wire harness clamps.
Attach the claw to connect the airbag connector.
Install the rubber band to the separate type front seat cushion spring assembly.
| 3. INSTALL SEPARATE TYPE FRONT SEATBACK COVER WITH PAD (for Power Seat) |
w/ Climate Control Seat System:
Install the separate type front seatback cover with pad to the separate type front seatback spring assembly.
Attach the 4 claws to install the 2 front seat headrest supports.
Attach the 2 hooks to connect the seatback cover bracket to the separate type front seatback spring assembly and install the nut.
![]() |
Using hog ring pliers, install 5 new hog rings.
| *1 | Hog Ring Pliers |
Attach the 7 hooks.
Attach the fastening tape to connect the airbag wire harness.
Attach the 3 airbag wire harness clamps.
Attach the claw to connect the airbag connector.
w/o Climate Control Seat System:
Install the separate type front seatback cover with pad to the separate type front seatback spring assembly.
Attach the 4 claws to install the 2 front seat headrest supports.
Attach the 2 hooks to connect the separate type front seatback cover bracket to the separate type front seatback spring assembly and install the nut.
Close the 2 fasteners and separate type front seatback cover.

| *A | for Cloth Seat | *B | for Synthetic Leather Seat |
![]() |
Using hog ring pliers, install 3 new hog rings.
| *1 | Hog Ring Pliers |
Attach the fastening tape to connect the airbag wire harness.
Attach the 3 airbag wire harness clamps.
Attach the claw to connect the airbag connector.
Install the rubber band to the separate type front seat cushion spring assembly.
| 4. INSTALL FRONT SEATBACK BOARD CLIP (w/ Climate Control Seat System) |
![]() |
Install the 2 new front seatback board clips to the front seatback board sub-assembly LH.
| 5. INSTALL FRONT SEATBACK BOARD SUB-ASSEMBLY LH (w/ Climate Control Seat System) |
![]() |
Attach the 2 guides and 2 claws of the front seatback board clip to install the seatback board sub-assembly LH.
Attach the 2 hooks to connect the 2 rubber bands.
| 6. INSTALL FRONT SEAT ASSEMBLY (for Manual Seat Type RH Side) |
| 7. INSTALL FRONT SEAT ASSEMBLY (for Power Seat) |