Home › Engine / Hybrid System › FA20 ENGINE CONTROL › KNOCK SENSOR

KNOCK SENSOR > INSTALLATION

for Preparation Click here



1. INSTALL KNOCK SENSOR


    A281038E01
  1. Install the 2 knock sensors onto the cylinder block with the 2 bolts as shown in the illustration.

    Torque:
    24 N*m{ 245 kgf*cm , 18 ft.*lbf }

    Text in Illustration 
    *a
    Bank 1
    *b
    Bank 2
    V100136
    Engine Front Side

  1. Connect the 2 knock sensors connectors.



2. INSTALL INTAKE MANIFOLD
(Click here)